Lid & base rigid box
Two-piece greyboard box with a fabric-wrapped insert.
Custom jewelry packaging — rigid boxes and fitted inserts
Custom jewelry boxes with inserts made for the piece.
Rigid boxes with fabric-wrapped or foam inserts cut for rings, necklaces, earrings and watches; drawer boxes, magnetic boxes and sleeves with foil and soft-touch finishes. Small, precise and made to present.
- Made to
- Your product's dimensions
- Structures
- Carton · rigid · mailer
- Minimum order
- 50 boxes
Packaging for jewelry
Small boxes, exact cavities, finishes you notice up close.
Jewelry packaging is the one category where the insert is more important than the box. A ring wants a slot; a necklace wants a card or a platform with a hook; earrings want two holes at the right spacing; a watch wants a pillow. Get the insert right and the box becomes a stage. We cut inserts to the piece and wrap them in satin, velvet or linen, then build the rigid box around them.
Because the boxes are small, finishes are seen at arm's length: a foil logo, a debossed mark, a soft-touch wrap in the brand color. Drawer boxes with ribbon pulls and magnetic boxes are the sector's presentation standards; a printed sleeve or belly band adds a seasonal or collection layer without a new box.
- Rings & earringsSlotted fabric inserts
- NecklacesPlatforms with hooks
- WatchesPillow inserts
Recommended packaging
What jewelry is packed in.
Materials & finishing
Greyboard and fabric. Foil on the lid.
Jewelry boxes are rigid by default. The wrap paper and the insert fabric carry the brand; foil or deboss carries the mark.
Materials & finishes- Greyboard1.2mm – 2mmRigid core for small boxes.
- Wrap paper120 – 157gsmPrinted, textured or leatherette.
- Insert fabricSatin · velvet · linenWrapped over board or foam.
- FoamCut to pieceSlots and pillows.
Finishes on the wrap
- Foil stamping
- Debossing
- Soft-touch wrap
- Leatherette wrap
- Ribbon pulls
- Printed sleeves
Inserts
Cut for the piece, wrapped in fabric.
Every jewelry insert is drawn from the piece's dimensions: slot width for a ring band, hole spacing for earrings, hook position for a chain. Then it is wrapped in the fabric that suits the brand.
- Ring slots and cushions
- Earring cards and holes
- Necklace platforms with hooks
- Watch pillows
- Multi-piece collection inserts
How it works
From product to sector-ready packaging.
You do not need a dieline, a spec sheet or print-ready artwork to start. You need to know roughly what you are packing.
Tell us the product
Dimensions, weight, how it is sold and where it travels. A photo is enough to start.
Structure & dieline
We recommend the construction for the sector and issue a dieline with any insert marked.
Board, print & finish
Stock and finishing chosen for the shelf, the courier or the gift table.
Proof & production
You approve a proof before anything runs. Quantities and lead time are stated in writing.
Delivery
Finished packaging is delivered free to your address in the United States, flat or assembled as the structure requires. Allow 3–5 working days for ground shipping after production.
Start a quote
Three answers is all it takes to open a job.
Structure, board and finishing come next — with our team, on the full quote form.
No account needed. Artwork and reference images can be attached on the next step.
Jewelry packaging questions
Before you ask.
Anything not covered here, put it in the notes on your quote and we will answer it directly.
Ask on your quoteWhat is the best box for a ring?
A small magnetic or lid-and-base rigid box with a slotted, fabric-wrapped cushion. The slot width is cut to the band.
Can the insert be made in my brand color?
Yes. Satin, velvet and linen fabrics are available in a range of colors; board inserts can be printed or colored.
Do you make packaging for necklaces?
Yes — shallow rigid boxes with a hooked platform or a card insert, and sleeved trays for lighter pieces.
Can jewelry boxes be foil stamped?
Yes. Foil on the lid — gold, silver, rose gold or holographic — is the sector's standard mark, often on a soft-touch or leatherette wrap.
What do you need to quote jewelry packaging?
The piece's dimensions (or a sample), the box style, insert fabric and color, quantity, finish and your logo artwork.
Resources
Guides for jewelry brands
Custom box inserts explained: board, foam, pulp and fabric
An insert turns a box into packaging. What each insert material does, which products need which, and how inserts are designed with the box.
Read the guidePackaging finishes explained: lamination, foil, emboss, spot UV and windows
What each finish does, what it looks like, what it combines with and when to specify it. The short reference for anyone briefing a custom box.
Read the guide
Related packaging
Packaging used for jewelry.
Start here
Send us your dimensions. We’ll send back a box.
Get a Custom Quote
Or talk to a packaging specialist: (209) 444-0744